For parts up to 2000 kg

The C 52 is equipped with compact spindles. All spindles can be replaced quickly and easily in case of failure.
With the different speed ranges and tool holding fixtures the tool spindles are suitable for a wide variety of machining tasks.

Automatic cabin door, bed flushing, electrical heat compensation, emulsion mist extraction system, precision packages, graphite machining packages, height-adjustable control panel with swivelling 19 ″ touch screen, rotating visibility improvement unit, cooling unit, chip conveyor, coolant nozzle and chip cart, tool breakage monitoring and measurement, additional magazines …

Heidenhain  TNC 640 / TNC7 and Siemens  S 840 D – these are the two control systems that can be used with the C 52 and C 52 U MT. They feature a variety of configurations and functionalities – including tools for improving precision for rotary and swivel operations, shell transformation and transparent tool management. Options such as Dynamic Efficiency, Dynamic Precision or the Kinematic Opt. software also serve to widen the range of functions.

The pick-up tool magazine of the C 52 / C 52 U MT is integrated into the machine bed, making for very good accessibility. There are 60 magazine pockets which can be extended to 325 by means of additional magazines. The maximum tool weight is 30 kg and the maximum tool length is  500 mm. The tool magazine of this milling/turning centre is rounded off by the swivelling control panel and covers for the tool holding fixture.

With dimensions of 800 x 800 /Ø 1000 mm or 1000 x 800 / Ø 1166 mm, the PW 2000 and PW 3000 pallet changers are no lightweights – just what the high-performance C 52 / C 52 U MT likes. Also, the RS 2 and RS 3 robot systems can be connected with the machining centre, up to two peripheral devices at the same time. If required, the HACS (‘HERMLE-Automation-Control-System’) and the HIMS (‘HERMLE-Information-Management-System’) can be used for easier operation.

From the comprehensive fluid technology to the optimized chip management system and a range of cooling lubricant units to the hinged belt conveyor: This High-Performance Line model has a number of highlights to offer, e.g. the right chip disposal equipment for removing all types of chip from the working area. This high-performance machining centre can be transported without being dismantled and set up without a foundation.